Accessories Generator Accessories For Sale In Killeen

Oil and coolant will need to be purchased separately based upon manufacturer recommendations listed below. The Liquid-Cooled Scheduled Maintenance Kits offer all the components necessary to perform a complete maintenance on Generac liquid-cooled generators.

The energy and water efficient system comes with a shower head sprayer, hose, suction cup, holder and hook attachment -- so you can post up and clean anywhere you can find some water.

This is a Locking Adapter for Generator/RV/EV/Range use. This is a Super Durable Over Molded Adapter. It is NEMA L14-30P 30 Amp 125/250-Volt 4-prong locking plug to NEMA 14-50R 50 Amp Straight Blade RV/EV/Range Connector.

Protect your investment with one of Honda's custom fitted generator covers. This cover will fit the following model Honda generators: EB4000XA, EB5000XK2, EB6500XK1, EU6500isA, EM4000SX, EM5000SXK3 and EM6500SXK2.

Champion Power Equipment 73500i 30A RV Ready Parallel Kit is designed to instantly increase your power and save space by linking two stackable 2000 Watt inverter generators. This RV Ready kit gives you 30 amps of output - enough power to start and run...

Thanks to the re-launch of Generacs HomeLink Upgradeable Manual Transfer Switches, protecting your desired loads and transitioning from portable power to an automatic standby solution is easier than ever before.

Our XKU kit model is for inverter or fully encased generators with case perimeter between 76 in. GenTent is rated for forecast winds up to 70 MPH, 18 in. This is typical of 3000-Watt to 7000-Watt inverter generators.

Make your generator portable and easy to maneuver while at home or on a jobsite. Steel legs while in a stationary position. Solid never-flat tires for a smooth and easy roll.

This kit is to be used in conjunction with the appropriate Cold Weather Kit that contains the necessary battery warmer assembly. The Extreme Cold Weather Kits include the appropriate block heater, step by step installation instructions and all necessary...

The Air-Cooled Scheduled Maintenance Kits offer all the components necessary to perform a complete maintenance on Generac air-cooled generators. Scheduled maintenance is a necessity for all standby generators.

Simply Clamp it, Frame it and Cover it in 3 easy steps to Weatherproof your Power. And rain up to 12 in. This is our universal fit model for open frame generators and includes 4 frame adapters that can be used on square and round tubular frames, for panels...

The wheel kit is designed as an accessory to the Durostar DS4000S Generator. It includes 2 solid heavy duty wheels, 2 support legs with vibration mounts, fold-away handle and all necessary hardware and tools for installation.

Durable nylon cover protects your generator from the damaging effects of the UV rays of the sun, long term exposure to rain and moisture, abrasive dirt and grime. It helps protect against scratches while keeping your generator looking new for years to...

Designed and made specifically for use with the NATURE'S GENERATOR systems, the NATURE'S GENERATOR Wind Turbine will allow you to harness the power of wind providing you an additional method of charging your NATURE'S GENERATOR.

When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator starting. The Cold Weather Kit consists of a battery warmer that has a thermostat built into the...

The spill box drain back kit allows fuel that was captured in the 5 Gal. This kit is only used in conjunction with the 5 Gal. It is not used independently. Spill box to be drained directly back into the fuel tank to avoid vapors.

The enclosure is the generator's first line of defense against the elements and it's important to keep it in good condition. Kits include the necessary paint to properly touch up a generator enclosure.

In either our Tan Light or GreySkies color, GenTent provides a pleasing finished look to your portable generator. And rain up to 12 in. Take your generator outside, run it in rain or wet weather and use GenTent to avoid CO poisoning, electrocution and...

Its durable exterior is made of a high-grade UV and water-resistant vinyl to fight rain, sleet, hail, snow and even sun while the inside contains a cotton lining to prevent scratches and scuffs on the body of your unit.

Generac's Smart Power Management System is designed to optimize the performance of a standby generator. Frequency is the true measure of generator engine performance and does not need to factor in increased ambient temperatures, elevation changes, or...

This is an Industrial/Generator Locking Adapter. This is a Super Durable Over Molded Adapter. It is NEMA L14-30P 30 Amp 125/250-Volt 4--prong locking plug to L6-20R 3-Prong 20 Amp 250-Volt Locking Female.

If the generator enclosure is scratched or damaged, it is important to touch up the paint to protect from future corrosion. The enclosure is the generator's first line of defense against the elements and is important to keep in good condition.

A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Maintenance is recommended at every 200 hours or 2 years.

Includes 4-frame adapters that can be used on square and round tubular frames, for panels or muffler heat shield blocking direct clamp mounts, and for extending generator frame length and width on large generators not quite large enough for the GenTent...

The fascia base wrap snaps together around the bottom of the new air-cooled generators. For Generac standby generators produced after 2016. This offers a sleek, contoured appearance as well as offering protection from rodents and insects by covering the...

Maintenance is recommended every 2 years or 100 hours of use. Don't wait until the power is out to discover you forgot to change the oil or replace a spark plug. Scheduled maintenance is key to extending the life and function of a home standby generator.

Some municipalities require the use of stainless steel fuel lines instead of the standard hoses provided with the diesel generator products. They are made specifically for Generac Protector Series Generators.