Accessories Generator Accessories For Sale In Illinois

Convenient storage on the back of the kit helps avoid clutter of connecting cords when not in use. The Generac 7118 parallel kit doubles your power when operating two GP2200i inverters at the same time.

This cover fits the EU2000i super quiet generator. Protect your investment with one of Honda's custom fitted generator covers. The silver cover is water-resistant.

This RV Ready kit gives you 30 amps of output - enough power to start and run a 15,000 BTU RV air conditioner. Champion Power Equipment 73500i 30A RV Ready Parallel Kit is designed to instantly increase your power and save space by linking two stackable...

The heater is easy to install with the included hardware. The Extreme Cold Weather Kits include the appropriate block heater, step by step installation instructions and all necessary mounting hardware for an extra degree of extreme weather protection.

This is a Super Durable Over Molded Adapter. This is Industrial/RV/Marine Shore/Generator Locking Adapter. It is NEMA L5-20P 20 Amp 125-Volt 3-prong locking plug to L5-30R 3-Prong 30 Amp Locking Female Connector.

This is a Super Durable Over Molded Adapter. This is Generator/Transfer Switch/Industrial Locking Adapter. It is NEMA L5-30P 30 Amp 125-Volt Locking Plug to L14-30R 4-Prong 30 Amp Locking Female Connector (Hots Bridged).

Ideal for quick and dependable use of power, this 25 ft., high-capacity 10-Gauge wire is surrounded by durable, outdoor-rated insulation (SJTW). Extension cord can be depended upon in any situation.

The Cold Weather Kits for the Protector Series consist of a block heater with all necessary mounting hardware and a battery warmer with a thermostat built-in to the battery wrap. These kits are recommended for generators installed in regions where the...

Lighted ends indicate when power is on. Get the most from your generator with the DEK 240-Volt Twist Lock Adapter. This adapter converts a single 240-Volt twistlock into six 120-Volt outlets.

Champion Support and our nationwide network of service centers will back up your purchase with a 1-year limited warranty and FREE lifetime technical support. Ideal for quick and dependable use of power, this 25 ft.

The Champion Power Equipment C90018 Weather-Resistant Storage Cover is designed to fit your 2800 Watt or higher inverter to keep it safe, clean and dry. Once the cover is on your inverter, the elastic base will provide a secure, custom-like fit that looks...

A scheduled maintenance program will ensure that your generator is always in top operating condition and that your warranty requirements are met. Oil and coolant will need to be purchased separately based upon manufacturer recommendations.

Power up your Firman Generator with the 25 ft. This 10 Gauge, 30 Amp cord is fully insulated and ready to take extensive abuse from the great outdoors. Plus with the individual circuit breakers, you can be sure that your equipment will be protected.

Maintenance for the fuel and oil filters is recommended at every 250 hours or 2 years and at 100 hours or 1 year for the air filter. The Protector Maintenance kits contain fuel, air and oil filters; a funnel and a chamois.

With combined interface/load management board. The Power Relay Module contains one 50 Amp power relay mounted in a NEMA 3R housing. Use up to four power relay modules with the load shed kit or the Model RXT automatic transfer switch.

The Extreme Cold Weather Kits include the appropriate block heater, step by step installation instructions and all necessary mounting hardware for an extra degree of extreme weather protection.

Product performance has earned LIFAN the reputation of dependability and value in all international markets. LIFAN Power USA is proud to offer the full line of LIFAN Power Equipment.

PowerBoss is a registered trademark of Briggs & Stratton Power Products. Never-Go-Flat Wheel Kit makes it easy to move your portable generator in and out of storage, to new work sites and anywhere else where there's a need for portable power.

The battery warmer of the Generac Cold Weather Kit for Liquid-Cooled Automatic Standby Generators with 2.4 l Engines activates when temperatures fall below an acceptable level, helping your generator maintain great performance.

Buy with confidence – Champion Support and our nationwide network of service centers will back up your purchase with a 1-year limited warranty and free lifetime technical support.

For Generac standby generators produced after 2016. The fascia base wrap snaps together around the bottom of the new air-cooled generators. This offers a sleek, contoured appearance as well as offering protection from rodents and insects by covering the...

The Generac Maintenance Kit for Portable Generators helps you extend the life and maintain the performance of your generator. Chamois, Stabile Sample. Sizes GP5000 through GP7500. The kit's funnel will help you perform successful oil changes.

Maintenance is a necessity for all standby generators. Maintenance is recommended at every 200-hours or 2-years. If running in a dusty environment, more frequent maintenance may be required.

The Pyle Pure Clean Pressure Washer System provides you with quick cleaning 'on-the-go'. Charge the water pump via the included USB cable and the seal is water tight for 100% waterproof safety.

PF923022 Harness the power of your Generator with the right PowerFit Adapter. Instantly turn your generator into the perfect jobsite/emergency power-source. Ideal for use at home and on the job.

Maintenance is recommended at every 200-hours or 2-years. The Air Cooled Scheduled Maintenance kits offer all the hardware necessary to perform a complete maintenance on our air cooled generators.

Generac 3 Phase Automatic Transfer Switches are designed for use with 3 phase generators that utilize an Evolution or Nexus Controller. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service.