Accessories Generator Accessories For Sale In Calgary

Take your generator outside, run it in rain or wet weather and use GenTent to avoid CO poisoning, electrocution and generator damage. Simply Clamp it, Frame it and Cover it in 3 easy steps to Weatherproof your Power.

If running in a dusty environment, more frequent maintenance may be required. The Air-Cooled Scheduled Maintenance Kits offer all the components necessary to perform a complete maintenance on Generac liquid-cooled generators.

The Sportsman Series Extra Large Waterproof Generator Cover is the best way to protect your valuable investment. The Generator Cover is constructed of 600D polyester with a PVC coating and fitted with an elastic cord drawstring around the bottom to keep...

Maintenance is recommended at every 200-hours or 2-years. The Air Cooled Scheduled Maintenance kits offer all the hardware necessary to perform a complete maintenance on our air cooled generators.

Never Flat Wheels with Axle Pin for easy installation, high leverage Single Folding Handle with Grip for easy maneuvering, supporting leg with Rubber Mounts to reduce vibration, and all hardware and tools necessary for assembly.

The total power output of both generators combine through the kit, allowing you to power large events or tasks. Easily connect 2 Energizer eZV P-series inverter generators with this kit.

The Extreme Cold Weather Kits include the appropriate block heater, step by step installation instructions and all necessary mounting hardware for an extradegree of extreme weather protection.

This is a Super Durable Over Molded Adapter. This is Household/Generator/Industrial/RV/Marine Locking Adapter. It is NEMA 5-20P 20 Amp 125-Volt Straight Blade Plug to L5-30R 3-Prong 30 Amp Locking Female Connector.

When installing a cold weather kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery...

When installing a cold weather kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery...

The kit consists of an automatic thermostatically controlled battery pad warmer and crankcase heater. This kit is intended for use with the CorePower/ES 7kW systems. It can also be retro-fitted to older air cooled product.

Scheduled maintenance is a necessity for all standby generators. Refer to the generator owner's manual for more information. Maintenance for the fuel and oil filters is recommended at every 250 hours or 2 years and at 100 hours or 1 year for the air filter.

The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating.

They are made specifically for Generac Protector Series Generators. Some municipalities require the use of stainless steel fuel lines instead of the standard hoses provided with the diesel generator products.

Refer to manual for specific model maintenance requirements. Oil will need to be purchased separately based upon manufacturer recommendations. Maintenance is recommended at every 100 hours or annually.

The DCP60 also provides dual action rotary encoder control with push knob for fine and coarse tuning enables quick setting of-Voltage/current; remote control for output-Voltage/current and on/off; three user-defined-Voltage and current presets; USB port...

Scheduled maintenance is a necessity for all standby generators. Refer to the generator owner's manual for more information. Maintenance for the fuel and oil filters is recommended at every 250 hours or 2 years and at 100 hours or 1 year for the air filter.

The cables are rated at 30A/3600 Watts. The kit is ready to use and features a 6 ft. Cable with two sets of generator connectors and one NEMA L5-30R Twist Lock outlet for use when running generators in parallel.

Handle has corrosion resistant coating. Protect your investment. This theft deterrent powder-coated steel bracket with tamper proof bolts prevents thieves from cutting the plastic handle and removing the cable lock or chain (sold separately).

The convenient handle allows for a quick and easy way to wind up the cord after use. The Cord and Reel Kit features a steel frame with 4 easy-access outlets. This accessory allows owners to plug in appliances while keeping the generator at a safe (and...

GenTent withstands forecast winds up to 70 mph, snow load up to 18 in. Take your generator outside, run it in rain or wet weather and use GenTent to avoid CO poisoning, electrocution and generator damage.

Whether your generator is on a dirty job or in storage, this cover provides vital protection. The Champion Power Equipment C90016 Weather-Resistant Storage Cover is designed to fit your 4800 to 11,500 Watt generator to keep it safe, clean and dry.

The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating.

The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands. Service rated (RTSW) switches are housed in an aluminum NEMA/UL Type 3R enclosure, with electrostatically applied powder coating.

If running in a dusty environment, more frequent maintenance may be required. The Liquid-Cooled Scheduled Maintenance Kits offer all the components necessary to perform a complete maintenance on Generac liquid-cooled generators.

The KOHLER Regulator Heater Kit is designed for KOHLER Generator models 20RESA, 20RESAL, 20RESC and 20RESCL. The regulator heater kit is recommended for reliable engine starting in temperatures from -18° to -29°C (0° to -20°F).

The kit is designed for use with Generac 22, 27, 36, 45 and 60 kW air-cooled automatic standby generators. The battery warmer of the Generac Cold Weather Kit for Liquid-Cooled Automatic Standby Generators with 2.4 l Engines activates when temperatures...