Accessories Fence Accessories For Sale In United States

Ideal for use in temporary electric fencing with round posts from 1/4" to 5/8" diameter. Convenient to use when more than one wire is required to hold stock.

Stainless steel clips for use with 3/8" or 1/2" fiberglass posts. Pig tail clips may be used instead of insulators.

Has adjustable drag to prevent free wheeling of coil. One-inch shaft turns on greased bushing for smooth operation and long life. New improved design has numerous adjustments to keep Hi-Tensile wire coil under control.

24' spring gate is excellent for electrically bridging wide gate openings. Contracts to 32” when open and includes the unique Safe-Fence tensioners with special gate hood plates to attach the spring and handle to any type of electric fence system.

Connects to an end tensioner to open gate.

Flexible fiberglass polyethylene arms support electrical streamers (30" in length and 6" apart) and bend in any direction. Holds cattle, hogs, sheep and horses like an electric fence.

Heavy duty plastic. Wind up or pay out your electric fence in minutes. Designed so it can be hung from a permanent fence wire or bolted to a post. Has a crank handle that operates like a ratchet for fence tension; will handle up to 1/2 mile of Bayguard.

Complete ground rod kit to get the most from your electric fence system. Contains 3 six foot galvanized rods, 3 heavy duty clamps, 48' connection wire and complete instructions.

Premium gate handle with comfortable rubber grip and unique internal overstretch protection. The half spring, springload internal mechanism will not allow you to over stretch.

Connects power from a 12-volt DC battery to 12-volt energizers equipped with input jack.

Lightning blows up the fuse and not your fencer. Just replace your fuse and you're good to go. The only external fuse protection for fence chargers in the world.

A quick, convenient way to splice Hot Rope for a better, stronger splice. Appropriate for use with 1/8" and 1/4" electric rope.

1 1/2" Tape Clip, designed specifically for equine electric fence tape to be securely attached to a Gallagher Insulated Line Post.

Made from 1/4” spring steel. Fence compression spring is used to determine wire tension on your fence line. Spring is 1 1/2” diameter, expands from 9” to 18”. One inch of compression equals 150 lbs of tension.

Matches the performance meter on Parmak fence chargers but will also read all fence chargers accurately. For use with low impedance fence chargers. Easy-to-read digital design, reads up to 19.9 kilovolts.

Converts 110-volt AC power to 12-volt DC power for AC/DC and DC convertible energizers.

Made with heavy-duty alligator clamps and double-shielded, high-voltage wire for leak-proof transfer of power from the energizer to the fence and ground rods. Cords are 46" long and clamps are 3".

Multi-mode fault finding tool: Current Meter and Digital Volt Meter (DVM) Convenient pocket size Water-resistant and impact-resistant case Large easy-to-read LCD display Long life battery - up to 3 years Auto ON/OFF.

The lights are calibrated to illuminate from 625 to 7000 volts. Convenient extra long 68" ground cord. A simple 8-light power indicator for standard or low impedance fencers.

Mounts with 2 large screws. All steel handle with heavy galvanized steel cable. Comes with 2 large screws and spring pin. Close your barbed wire gates with an easy crank handle. Easily used by anyone, simply turn the crank to desired tension.

Vinyl sleeves slip over T-posts for safety and appearance. Complete with cap.

Features 2 double-post rope clamps and joined by 32” of 12 gauge, shielded wire. May be used to terminate the rope at the end of the fence. Connect and transfer power from 1 strand of 1/4” electric rope or braid to another.

Replacement stainless steel K-clips for the Fence Flag (#24135) operation.

When voltage drops, fence alert flashes to notify you of problems. Starts working when your fence stops. 1-year warranty. Provides an instant warning of low or intermittent voltages to detect fencing problems during hours of darkness.

Features a double-post rope clamp connected to a 3/8” terminal with 32” of 12 gauge, shielded wire. May also be used to terminate the rope at the end of the strand. Connect a fence energizer to 1/4” electric rope or braid.

Vinyl sleeve fits 4" x 4" x 5' posts including gates and corners. Complete with caps.

Fits the 13-19' and 18-24' gate.