Accessories Electric Fencing For Sale In North Carolina

Featured video, click image to play.

10-year warranty. Includes all three end strain elements - insulator, strainer, and steel cable. For corner or end posts. No wire tying, fast and simple. Fits up to 8" post. Simply slide over the post and you're done.

It flashes on and off with every pulse of the fencer with very little draw down of the voltage. This sensitizes the spark gap with your entire fence, and if something touches the fence, the Knocker spark gap will disengage and the full shock of the charger...

Easy to use and portable! Install the S10 or S16 Energizer on a Gallagher Ring Top Post (#40990) using this post mount.

Matches the performance meter on Parmak fence chargers but will also read all fence chargers accurately. For use with low impedance fence chargers. Easy-to-read digital design, reads up to 19.9 kilovolts.

Cords are 46" long and clamps are 3". Made with heavy-duty alligator clamps and double-shielded, high-voltage wire for leak-proof transfer of power from the energizer to the fence and ground rods.

Features a double-post rope clamp connected to a 3/8” terminal with 32” of 12 gauge, shielded wire. May also be used to terminate the rope at the end of the strand. Connect a fence energizer to 1/4” electric rope or braid.

Made from 1/4” spring steel. Fence compression spring is used to determine wire tension on your fence line. Spring is 1 1/2” diameter, expands from 9” to 18”. One inch of compression equals 150 lbs of tension.

Plugs into any 110 volt outlet, limits high voltage spikes to 350 volts. Absorbs up to 34 watts of transient power. Helps protect your 110-volt plug in energizer from power surges caused by lightning strikes.

Aluminum connector with wire to connect polytape or polywire to your electric fence charger.

For use with ground rods for proper electric fence grounding.

Ground rod clamp connects grounding wire to the ground rod.

The stainless steel K-Clips instantly attaches to existing wire fences for geater visibility. Comes packed 12 flags and 12 K-Clips per bag. These bright white 3" x 5" plastic markers give you a safer, more visible fence, even at night.

Fi-Shock In-Line Strainer Handle is a handle for In-Line strainer model # 400-400 CC.

Complete with gate handle, 2 tensioners and 20' tape.

Contracts to 32” when open and includes the unique Safe-Fence tensioners with special gate hood plates to attach the spring and handle to any type of electric fence system. 24' spring gate is excellent for electrically bridging wide gate openings.

Electri-Gate is a high conductive stretchable cord with a high impact plastic handle. Comes complete with two 2-way gate anchors. Has an in-line length adjustor for gates from 8 ft.

Has adjustable drag to prevent free wheeling of coil. One-inch shaft turns on greased bushing for smooth operation and long life. New improved design has numerous adjustments to keep Hi-Tensile wire coil under control.

Also ideal for twisting T-post wire clips or spacer clips to fasten wire onto posts. Essential fencing Zareba Three-Hole Twisting tool for bending or twisting high tensile or steel wire.

Ideal for all underground applications. One 49' roll is adequate for connection of two standard gates. Highly conductive 12-gauge aluminum wire insulated with heavy polyethylene coating for up to 20,000 volts.

Connects power from a 12-volt DC battery to 12-volt energizers equipped with input jack.

Lightning blows up the fuse and not your fencer. Just replace your fuse and you're good to go. The only external fuse protection for fence chargers in the world.

Fits the 13-19' and 18-24' gate.