Accessories Electric Fencing For Sale In Nebraska

A quick, convenient way to splice Hot Rope for a better, stronger splice. Appropriate for use with 1/8" and 1/4" electric rope.

Provides a digital read-out of voltage on the fence line, up to 9,900 volts (9.9 kv). Digital accuracy of electric fence line voltage. The Zareba Systems Digital Electric Fence Tester is a valuable tool for monitoring electric fence system performance.

In-Line strainer constructed with a galvanized steel frame and aluminum alloy spool and features a spring loaded clip to keep from unwinding. Recommended for high tensile wire use (usually 12.5 gauge wire).

Claw style insulator ideal for use in temporary electric fencing with rod posts 3/16" - 3/8" diameter. Fits Ring Top Post (#40990).

Quick and convenient way to make a good electrical connection to your polytape or polywire. Complete with two connectors and wire to connect two strands of polytape or polywire.

It is a sealed lead acid (AGM) termination .187 in. Power Patrol Electric Fence Battery 6 Volt is for Gallagher electric fence model A670.

The Insulated End Strainer is a heavy duty, all-in-one, corrosion-resistant assembly to insulate, and tighten up to 4 mm/15 gauge fence wire. 12-tooth spool for fine adjustment, robust, high-quality, spring-loaded locking clip.

Electri-Gate is a high conductive stretchable cord with a high impact plastic handle. Has an in-line length adjustor for gates from 8 ft. Comes complete with two 2-way gate anchors.

Stainless steel contacts. Install at convenient locations like fence corners and gates to switch off a section of fence for maintenance and routine checks. Hardware not included.

Connecting gates to a single post.

Provides flexibility to liven the fence from either the reel or handle end. Ideal to use with the Geared Medium Reel (#42522).

Easily secure your fencing unit to a t-post with the help of this mounting bracket. To be used with fencing model numbers DF-SP-LI (27127) and MAG12SP (27128).

Gallagher Pro Econo Reel. Reversible and replaceable hub. UV-stabilized reel. Positive locking ratchet mechanism.

Has adjustable drag to prevent free wheeling of coil. New improved design has numerous adjustments to keep Hi-Tensile wire coil under control. One-inch shaft turns on greased bushing for smooth operation and long life.

Premium gate handle with comfortable rubber grip and unique internal overstretch protection. The half spring, springload internal mechanism will not allow you to over stretch.

Connects power from a 12-volt DC battery to 12-volt energizers equipped with input jack.

All steel handle with heavy galvanized steel cable. Close your barbed wire gates with an easy crank handle. Mounts with 2 large screws. Comes with 2 large screws and spring pin. Easily used by anyone, simply turn the crank to desired tension.

Use this pair of Zareba Systems battery clips to attach lead-out wire from fence controller to battery.

Stainless steel clips for use with 3/8" or 1/2" fiberglass posts. Pig tail clips may be used instead of insulators.

Complete ground rod kit to get the most from your electric fence system. Contains 3 six foot galvanized rods, 3 heavy duty clamps, 48' connection wire and complete instructions.

Protect your valuable horses and livestock from serious injury and unsightly scrapes. Safe-T post caps are designed to conform to a wide range of steel post sizes and stay on tight, eliminating the hazards of sharp, jagged post tops.

Fi-Shock In-Line Strainer Handle is a handle for In-Line strainer model # 400-400 CC.

For use with ground rods for proper electric fence grounding.

Attach to fences near roadways, driveways, buildings, etc., anywhere fence is passed or seen during hours of darkness. Provides an instant warning of low or intermittent voltages to detect fencing problems during hours of darkness.