Accessories Electric Fencing For Sale In Nashville Davidson

Strongest, long-term, end-strain insulation for high tensile permanent electric fencing. 10-year warranty.

Connects power from a 12-volt DC battery to 12-volt energizers equipped with input jack.

Vinyl sleeves slip over T-posts for safety and appearance. Complete with cap.

Just replace your fuse and you're good to go. Lightning blows up the fuse and not your fencer. The only external fuse protection for fence chargers in the world.

Rated for high-tensile wire. Has a tough insulating grip and strong spring. Heavy-duty steel construction.

Replacement spool for winding and unwinding portable fencing.

A quick, convenient way to splice Hot Rope for a better, stronger splice. Appropriate for use with 1/8" and 1/4" electric rope.

Activated when fence pulse is detected Switch to change between DVM and Current Meter modes Retractable voltage probe for reading voltage on energizers and other hard to reach areas Micro-chip technology that enables low voltage operation Detachable ground...

Quick and convenient way to make a good electrical connection to your polytape or polywire. Complete with two connectors and wire to connect two strands of polytape or polywire.

Provides flexibility to liven the fence from either the reel or handle end. Ideal to use with the Geared Medium Reel (#42522).

Install the S10 or S16 Energizer on a Gallagher Ring Top Post (#40990) using this post mount. Easy to use and portable!

For use with low impedance fence chargers. Matches the performance meter on Parmak fence chargers but will also read all fence chargers accurately. Easy-to-read digital design, reads up to 19.9 kilovolts.

Zareba Electric Fence Galvanized Brace Pin 5 in. Is used to attach horizontal brace posts to vertical brace posts in corners. Standard 3/8 In. hole for easy installation. They are also used for all brace pos and anchor post assemblies.

Electri-Gate is a high conductive stretchable cord with a high impact plastic handle. Has an in-line length adjustor for gates from 8 ft. Comes complete with two 2-way gate anchors.

Fi-Shock In-Line Strainer Handle is a handle for In-Line strainer model # 400-400 CC.

Zareba Inline Cut Off Switch is a convenient way to cut power to an electric fence at various locations along the fence. It is also useful to track down shorts.

Connects to an end tensioner to open gate.

10-year warranty. No wire tying, fast and simple. Includes all three end strain elements - insulator, strainer, and steel cable. For corner or end posts. Fits up to 8" post. Strong, stainless steel cable for long life.

Large read out. The Zareba Systems Digital Electric Fence Tester is a valuable tool for monitoring electric fence system performance. Provides a digital read-out of voltage on the fence line, up to 9,900 volts (9.9 kv).

It is a sealed lead acid (AGM) termination .187 in. Power Patrol Electric Fence Battery 6 Volt is for Gallagher electric fence model A670.

Use this pair of Zareba Systems battery clips to attach lead-out wire from fence controller to battery.

Claw style insulator ideal for use in temporary electric fencing with rod posts 3/16" - 3/8" diameter. Fits Ring Top Post (#40990).

The Electric Fence Lights only draw current from your fence until the moment something touches the fence. So don't worry if your tester is showing a draw down on your fence while the light is flashing.

Premium gate handle with comfortable rubber grip and unique internal overstretch protection. The half spring, springload internal mechanism will not allow you to over stretch.