Accessories Electric Fencing For Sale In Michigan

Pig tail clips may be used instead of insulators. Stainless steel clips for use with 3/8" or 1/2" fiberglass posts.

May be used to terminate the rope at the end of the fence. Connect and transfer power from 1 strand of 1/4” electric rope or braid to another. Features 2 double-post rope clamps and joined by 32” of 12 gauge, shielded wire.

10-year warranty. Strongest, long-term, end-strain insulation for high tensile permanent electric fencing.

Complete with gate handle, 2 tensioners and 20' tape.

For use with low impedance fence chargers. Easy-to-read digital design, reads up to 19.9 kilovolts. Matches the performance meter on Parmak fence chargers but will also read all fence chargers accurately.

For your easy convenience to splice fence.

Fits the 13-19' and 18-24' gate.

Connects power from a 12-volt DC battery to 12-volt energizers equipped with input jack.

1-year warranty. Hand-held unit allows you to quickly move down your fence line, comparing voltage and current readings as you go, to locate short circuits and faults on your fence.

Fits the 13-19' and 18-24' gate.

Easy to use and portable! Install the S10 or S16 Energizer on a Gallagher Ring Top Post (#40990) using this post mount.

Replacement spool for winding and unwinding portable fencing.

Activated when fence pulse is detected Switch to change between DVM and Current Meter modes Retractable voltage probe for reading voltage on energizers and other hard to reach areas Micro-chip technology that enables low voltage operation Detachable ground...

Fi-Shock In-Line Strainer Handle is a handle for In-Line strainer model # 400-400 CC.

Displays fence voltage in 100V increments under 10kV. The DVM reads the voltage for battery energizers even when the energizers are in Battery Save Mode. Displays fence voltage from 10kV to 12kV in 1,000 volt increments.

Converts 110-volt AC power to 12-volt DC power for AC/DC and DC convertible energizers.

Appropriate for use with 1/8" and 1/4" electric rope. A quick, convenient way to splice Hot Rope for a better, stronger splice.

This visor clip can be rotated into any one of the four positions (0°, 90°, 180°, 270°) for your convenience. For more information go to www.P65Warnings.ca.gov There are dedicated buttons for PortyMode (hold open) and Testing System Battery status.

The finish of the Everbilt hinge straps allows for outdoor use in all weather conditions. The Everbilt 12 in. Hinge Strap is a durable solution to assist in your gate building needs.

Cords are 46" long and clamps are 3". Made with heavy-duty alligator clamps and double-shielded, high-voltage wire for leak-proof transfer of power from the energizer to the fence and ground rods.

Designed so it can be hung from a permanent fence wire or bolted to a post. Wind up or pay out your electric fence in minutes. Has a crank handle that operates like a ratchet for fence tension; will handle up to 1/2 mile of Bayguard.

May also be used to brace wooden post with T-post. Wedge-Loc 60 Degree Socket for T-Post attaches to Universal Collar, accepts and holds in place T-post used for diagonal brace.