Accessories Electric Fencing For Sale In Kentucky

Fits the 13-19' and 18-24' gate.

Ground rod clamp connects grounding wire to the ground rod.

Close your barbed wire gates with an easy crank handle. A lock can be added to keep out unwanted guests. Mounts with 2 large screws. Comes with 2 large screws and spring pin. All steel handle with heavy galvanized steel cable.

Converts 110-volt AC power to 12-volt DC power for AC/DC and DC convertible energizers.

The Zareba Systems Digital Electric Fence Tester is a valuable tool for monitoring electric fence system performance. Durable plastic case with self-contained ground probe. Large read out.

No more opening and closing gates. Flexible fiberglass polyethylene arms support electrical streamers (30" in length and 6" apart) and bend in any direction. Energized with any electric fencer.

Convenient to use when more than one wire is required to hold stock. Ideal for use in temporary electric fencing with round posts from 1/4" to 5/8" diameter.

Recommended for high tensile wire use (usually 12.5 gauge wire). In-Line strainer constructed with a galvanized steel frame and aluminum alloy spool and features a spring loaded clip to keep from unwinding.

Spring loaded PVC gate handle.

Heavy duty plastic. Designed so it can be hung from a permanent fence wire or bolted to a post. Wind up or pay out your electric fence in minutes. Has a crank handle that operates like a ratchet for fence tension; will handle up to 1/2 mile of Bayguard.

Nylon snap-on clip insulators for use with the Insulated Line Post.

This sensitizes the spark gap with your entire fence, and if something touches the fence, the Knocker spark gap will disengage and the full shock of the charger will go to whatever is touching your fence.

Reads from 1,000-10,000 volts; lights glow in sequence to indicate approximate voltage. For use with all fence energizers. Enables you to test the "control factor" of your system and assist you in fault finding, at a very reasonable price.

Replacement spool for winding and unwinding portable fencing.

Just replace your fuse and you're good to go. The only external fuse protection for fence chargers in the world. Lightning blows up the fuse and not your fencer.

The Zareba Large Tension Spring helps to absorb the expansion and contraction of steel fence wire used in high tensile fence applications. It measures wire tension; 1-inch compression equals 150 lbs.

Hardware not included. Install at convenient locations like fence corners and gates to switch off a section of fence for maintenance and routine checks. Stainless steel contacts.

Eagle Picher Electric Fence Battery 4 Volt is for Zarebra electric fence models SP-8904, SP-44, SP-504, SP-904 and SP-4404. It is a sealed lead acid (AGM) termination .187 in.

Power Patrol Electric Fence Battery 6 Volt is for Gallagher electric fence model A670. It is a sealed lead acid (AGM) termination .187 in.

May also be used to terminate the rope at the end of the strand. Connect a fence energizer to 1/4” electric rope or braid. Features a double-post rope clamp connected to a 3/8” terminal with 32” of 12 gauge, shielded wire.

Fits the 13-19' and 18-24' gate.

They are also used for all brace pos and anchor post assemblies. Standard 3/8 In. hole for easy installation. Zareba Electric Fence Galvanized Brace Pin 5 in. Is used to attach horizontal brace posts to vertical brace posts in corners.

Fits Ring Top Post (#40990). Claw style insulator ideal for use in temporary electric fencing with rod posts 3/16" - 3/8" diameter.