Accessories Electric Fencing For Sale In Iowa

Attach to fences near roadways, driveways, buildings, etc., anywhere fence is passed or seen during hours of darkness. When voltage drops, fence alert flashes to notify you of problems.

It measures wire tension; 1-inch compression equals 150 lbs. The Zareba Large Tension Spring helps to absorb the expansion and contraction of steel fence wire used in high tensile fence applications.

Easily secure your fencing unit to a t-post with the help of this mounting bracket. To be used with fencing model numbers DF-SP-LI (27127) and MAG12SP (27128).

The pinlock insulator's jaw strength can withstand significant tension and ensures a strong dead end connection. Safe to use with high visiblity handle with large shields. Gallagher Electric Bungy Gate is a pre-assembled gate-bungy cord that stretched...

Test voltage under "load" on your fence. For use with all fence energizers. Enables you to test the "control factor" of your system and assist you in fault finding, at a very reasonable price.

Easy to screw into the ground. Holds great! Great price.

Provides necessary protection for your charger against the increased voltage surge to your fence created by lightning strikes within several miles. When a Storm Guard Module is in use, it can absorb this surge and fail, instead of causing failure to your...

Install every 1,500 - 2,500 feet. Every friction point (corners, bends, dips, rises) reduces the strainer's capacity by about 500 feet. Use Zareba In-Line Strainer to increase tension on high tensile fence wire to about 250 lbs.

It is a sealed lead acid (AGM) termination .187 in. Power Patrol Electric Fence Battery 6 Volt is for Gallagher electric fence model A670.

Helps absorb expansion and contraction of the fence wire. Made from 1/4” spring steel. Fence compression spring is used to determine wire tension on your fence line. One inch of compression equals 150 lbs of tension.

Used for adjusting wire tension with the wire strainers.

12-tooth spool for fine adjustment, robust, high-quality, spring-loaded locking clip. 10-year warranty. The Insulated End Strainer is a heavy duty, all-in-one, corrosion-resistant assembly to insulate, and tighten up to 4 mm/15 gauge fence wire.

Features a double-post rope clamp connected to a 3/8” terminal with 32” of 12 gauge, shielded wire. May also be used to terminate the rope at the end of the strand. Connect a fence energizer to 1/4” electric rope or braid.

Fi-Shock In-Line Strainer Handle is a handle for In-Line strainer model # 400-400 CC.

Stainless steel contacts. Hardware not included. Install at convenient locations like fence corners and gates to switch off a section of fence for maintenance and routine checks.

It is a sealed lead acid (AGM) termination .187 in. Eagle Picher Electric Fence Battery 4 Volt is for Zarebra electric fence models SP-8904, SP-44, SP-504, SP-904 and SP-4404.

Fits the 13-19' and 18-24' gate.

Is used to attach horizontal brace posts to vertical brace posts in corners. Standard 3/8 In. hole for easy installation. Zareba Electric Fence Galvanized Brace Pin 5 in. They are also used for all brace pos and anchor post assemblies.

Has a tough insulating grip and strong spring. Rated for high-tensile wire. Heavy-duty steel construction.

Has an in-line length adjustor for gates from 8 ft. Comes complete with two 2-way gate anchors. Electri-Gate is a high conductive stretchable cord with a high impact plastic handle.

So don't worry if your tester is showing a draw down on your fence while the light is flashing. The Electric Fence Lights only draw current from your fence until the moment something touches the fence.

For use with these energizers: S10, S16, S22, and B700.

Provides flexibility to liven the fence from either the reel or handle end. Ideal to use with the Geared Medium Reel (#42522).

Premium gate handle with comfortable rubber grip and unique internal overstretch protection. The half spring, springload internal mechanism will not allow you to over stretch.