Accessories Electric Fencing For Sale In Illinois

In-Line strainer constructed with a galvanized steel frame and aluminum alloy spool and features a spring loaded clip to keep from unwinding. Recommended for high tensile wire use (usually 12.5 gauge wire).

24' spring gate is excellent for electrically bridging wide gate openings. Contracts to 32” when open and includes the unique Safe-Fence tensioners with special gate hood plates to attach the spring and handle to any type of electric fence system.

Premium gate handle with comfortable rubber grip and unique internal overstretch protection. The half spring, springload internal mechanism will not allow you to over stretch.

Reads from 1,000-10,000 volts; lights glow in sequence to indicate approximate voltage. Enables you to test the "control factor" of your system and assist you in fault finding, at a very reasonable price.

May be used to terminate the rope at the end of the fence. Features 2 double-post rope clamps and joined by 32” of 12 gauge, shielded wire. Connect and transfer power from 1 strand of 1/4” electric rope or braid to another.

May also be used to terminate the rope at the end of the strand. Features a double-post rope clamp connected to a 3/8” terminal with 32” of 12 gauge, shielded wire. Connect a fence energizer to 1/4” electric rope or braid.

It is a sealed lead acid (AGM) termination .187 in. Eagle Picher Electric Fence Battery 4 Volt is for Zarebra electric fence models SP-8904, SP-44, SP-504, SP-904 and SP-4404.

Claw style insulator ideal for use in temporary electric fencing with rod posts 3/16" - 3/8" diameter. Fits Ring Top Post (#40990).

For use with low impedance fence chargers. Matches the performance meter on Parmak fence chargers but will also read all fence chargers accurately. Easy-to-read digital design, reads up to 19.9 kilovolts.

Locate in the middle of a fence span or halfway between two corner posts. Use Zareba In-Line Strainer to increase tension on high tensile fence wire to about 250 lbs. Every friction point (corners, bends, dips, rises) reduces the strainer's capacity by...

Aluminum connector with wire to connect polytape or polywire to your electric fence charger.

For use with these energizers: S10, S16, S22, and B700.

Connects to an end tensioner to open gate.

Quick and convenient way to make a good electrical connection to your polytape or polywire. Complete with two connectors and wire to connect two strands of polytape or polywire.

Ideal for use in temporary electric fencing with round posts from 1/4" to 5/8" diameter. Convenient to use when more than one wire is required to hold stock.

Stainless steel clips for use with 3/8" or 1/2" fiberglass posts. Pig tail clips may be used instead of insulators.

OK Brand Electric Fence Wire is manufactured with an extremely strong, smooth wire to resist breakage over long distances. OK Brand High-Tensile Field Fence is 12-1/2 gauge, 170,000 PSI and 4,000 ft.

Comes packed 12 flags and 12 K-Clips per bag. The stainless steel K-Clips instantly attaches to existing wire fences for geater visibility. These bright white 3" x 5" plastic markers give you a safer, more visible fence, even at night.

Essential fencing Zareba Three-Hole Twisting tool for bending or twisting high tensile or steel wire. Also ideal for twisting T-post wire clips or spacer clips to fasten wire onto posts.

Includes all three end strain elements - insulator, strainer, and steel cable. Fits up to 8" post. 10-year warranty. For corner or end posts. Strong, stainless steel cable for long life.

The hook comes with two screw eyes and are easy to install. They are often used in the yard to close a light gate or shed. Gate Hook and Eyes are great for light duty closures and for wood applications.

Our fully adjustable, Adjust-A-Gate II system is ideal for repairing an old gate or building a new gate. The Adjust-A-Gate systems will adjust to fit openings of up to 6 ft. (single) or 16 ft.