Accessories Electric Fencing For Sale In District Of Columbia

Install the S10 or S16 Energizer on a Gallagher Ring Top Post (#40990) using this post mount. Easy to use and portable!

The only external fuse protection for fence chargers in the world. Lightning blows up the fuse and not your fencer. Just replace your fuse and you're good to go.

Fence compression spring is used to determine wire tension on your fence line. Spring is 1 1/2” diameter, expands from 9” to 18”. Made from 1/4” spring steel. One inch of compression equals 150 lbs of tension.

Converts 110-volt AC power to 12-volt DC power for AC/DC and DC convertible energizers.

Connects to an end tensioner to open gate.

Featured video, click image to play. Multi-mode fault finding tool: Current Meter and Digital Volt Meter (DVM) Convenient pocket size Water-resistant and impact-resistant case Large easy-to-read LCD display Long life battery - up to 3 years Auto ON/OFF.

Featured video, click image to play.

In-Line strainer constructed with a galvanized steel frame and aluminum alloy spool and features a spring loaded clip to keep from unwinding. Recommended for high tensile wire use (usually 12.5 gauge wire).

A quick, convenient way to splice Hot Rope for a better, stronger splice. Appropriate for use with 1/8" and 1/4" electric rope.

Stainless steel clips for use with 3/8" or 1/2" fiberglass posts. Pig tail clips may be used instead of insulators.

Close your barbed wire gates with an easy crank handle. A lock can be added to keep out unwanted guests. All steel handle with heavy galvanized steel cable. Comes with 2 large screws and spring pin.

Easily secure your fencing unit to a t-post with the help of this mounting bracket. To be used with fencing model numbers DF-SP-LI (27127) and MAG12SP (27128).

Vinyl sleeves slip over T-posts for safety and appearance. Complete with cap.

Complete with gate handle, 2 tensioners and 20' tape.

A multi-purpose, high conductive connector that can be used with lead wire to provide a connection from the fencer to your fence or for connecting multiple strand fences together; also a great way to splice ½” poly tape.

Zareba Electric Fence Galvanized Brace Pin 5 in. They are also used for all brace pos and anchor post assemblies. Standard 3/8 In. hole for easy installation. Is used to attach horizontal brace posts to vertical brace posts in corners.

Replacement spool for winding and unwinding portable fencing.

Suitable for use with any model or brand of low impedance fence charger that has 1 joule or greater output. Provides necessary protection for your charger against the increased voltage surge to your fence created by lightning strikes within several miles.

The Insulated End Strainer is a heavy duty, all-in-one, corrosion-resistant assembly to insulate, and tighten up to 4 mm/15 gauge fence wire. Integrated joint clamp allows direct attachment of wires for paralleling and power connection.

1 1/2" Tape Clip, designed specifically for equine electric fence tape to be securely attached to a Gallagher Insulated Line Post.

Use Zareba In-Line Strainer to increase tension on high tensile fence wire to about 250 lbs. Locate in the middle of a fence span or halfway between two corner posts. Every friction point (corners, bends, dips, rises) reduces the strainer's capacity by...

New improved design has numerous adjustments to keep Hi-Tensile wire coil under control. Has adjustable drag to prevent free wheeling of coil. One-inch shaft turns on greased bushing for smooth operation and long life.