Accessories Electric Fencing For Sale In Dallas

10-year warranty. Long-life Super Strain Insulator with pre-attached stainless steel cable. No wire tying or special tools required. Fits up to 8" post.

Has adjustable drag to prevent free wheeling of coil. One-inch shaft turns on greased bushing for smooth operation and long life. New improved design has numerous adjustments to keep Hi-Tensile wire coil under control.

Bolt measures 6” (measured from the 90 degree angle to the point of bolt.) Used with Hot Rope or polywire to turn corners or as an end insulator.

The stainless steel K-Clips instantly attaches to existing wire fences for geater visibility. Comes packed 12 flags and 12 K-Clips per bag. These bright white 3" x 5" plastic markers give you a safer, more visible fence, even at night.

Protect your valuable horses and livestock from serious injury and unsightly scrapes. Safe-T post caps are designed to conform to a wide range of steel post sizes and stay on tight, eliminating the hazards of sharp, jagged post tops.

The lights are calibrated to illuminate from 625 to 7000 volts. Convenient extra long 68" ground cord. A simple 8-light power indicator for standard or low impedance fencers.

For use with all fence energizers. Enables you to test the "control factor" of your system and assist you in fault finding, at a very reasonable price. Test voltage under "load" on your fence.

Connects power from a 12-volt DC battery to 12-volt energizers equipped with input jack.

Stainless steel clips for use with 3/8" or 1/2" fiberglass posts. Pig tail clips may be used instead of insulators.

Spring loaded PVC gate handle.

Use this pair of Zareba Systems battery clips to attach lead-out wire from fence controller to battery.

Standard 3/8 In. hole for easy installation. Zareba Electric Fence Galvanized Brace Pin 5 in. Is used to attach horizontal brace posts to vertical brace posts in corners. They are also used for all brace pos and anchor post assemblies.

Lightning blows up the fuse and not your fencer. Just replace your fuse and you're good to go. The only external fuse protection for fence chargers in the world.

Features 2 double-post rope clamps and joined by 32” of 12 gauge, shielded wire. May be used to terminate the rope at the end of the fence. Connect and transfer power from 1 strand of 1/4” electric rope or braid to another.

Close your barbed wire gates with an easy crank handle. All steel handle with heavy galvanized steel cable. Easily used by anyone, simply turn the crank to desired tension. Comes with 2 large screws and spring pin.

Claw style insulator ideal for use in temporary electric fencing with rod posts 3/16" - 3/8" diameter. Fits Ring Top Post (#40990).

It measures wire tension; 1-inch compression equals 150 lbs. The Zareba Large Tension Spring helps to absorb the expansion and contraction of steel fence wire used in high tensile fence applications.

Provides necessary protection for your charger against the increased voltage surge to your fence created by lightning strikes within several miles. When a Storm Guard Module is in use, it can absorb this surge and fail, instead of causing failure to your...

Not for use with coated wire. This tightener is installed without having to disconnect the end of the fence. Can be tightened with a 1/2” drive ratchet. This powder-coated, white, aluminum tightener is best for use with rope or light-gauge wire.

Easily secure your fencing unit to a t-post with the help of this mounting bracket. To be used with fencing model numbers DF-SP-LI (27127) and MAG12SP (27128).

Attaches horizontal brace post to upright brace posts. Use in vertical brace post corner and brace assemblies. Rust-resistant Zareba 10-Inch Galvanized Brace Pin is for use when building corner and brace assemblies for your fence line.

Quick and convenient way to make a good electrical connection to your polytape or polywire. Complete with two connectors and wire to connect two strands of polytape or polywire.