9 Ft Truck Bodies Only For Sale In Connecticut

Body Only in prime paint. A1011 steel floor. 40" front with window and cabshield. NEW 2018 Crysteel 9' x 96" wide E-Tipper Dump Body. Hoist, Paint, and Installation services available.

Please check with us for exact fitment as makes vary slightly. BRADFORD BUILT 96" X 112" STEEL 4 BOX UTILITY BED, 34" FRAME WIDTH, 60" CAB TO AXLE, LIGHTED HEADACHE RACK, LED LIGHTS, GN & RECEIVER HITCH, TAPERED REAR CORNERS, 1/8" STEEL TREADPLATE FLOOR,...

It has two fuel fills, came off a 1 Ton ford. Custom made, 9 ft long by 7 ft wide. 60 INCHES CAB TO REAR AXLE CENTER--3 STORAGE BOXES BUILT IN

Capacity Recessed Gooseneck Ball and Receiver Hitch. Powder Coated Steel Frame, 4" Flip Down Siderails, Headache Rack with Lights, 30,000 lb. Stake Pockets, Flush Mount Tie Down Rings.

*PRICE REDUCED! 16" Fold down sides, 22" single panel tailgate with independent upper tailgate latching. 40" Front with Tapered Integral 1/4 Cabshield. 3/16" 6061-T6 Aluminum floor, 3/16" 5052 Aluminum construction Crossmemberless understructure, 8" longsills...

BRADFORD BUILT 96" X 112" STEEL WORKBED,

BODY SPECS: Manufacturer: CM Trailers, Serial: 95219, Length: 9.4', Width: 93", Headboard Height: 39", Gooseneck Hitch Ready, Chassis stock #7979

9’L Knaphiede Service Body, Fits 60” Can To Axle Dual Rear Wheel Trucks, Good Condition, 6 Side Compartments, Rear Tailgate, Air Hose Reel, Over Cab Rack For Trailers, Ramps, Quality Install Services Available

Eby Big Country 9' x 97'' Flatbed Towing Body; FOR DUALLY CAB & CHASSIS; Stake Pockets & Rubrail; Flush Trap Door for Gooseneck Hitch Access; Mud Flaps Included; Fenderettes Included; Aluminum; Fits a Chevy, Dodge or Ford;

Bed can be in prime or painted black. Replace your old bed but use your hydraulics. Loaded on your trailer. 9' gravel beds for 1 ton trucks, has all lights, but has no hydraulics & not mounted.

DUMP BODY - UNDERBODY - 9'

The sub frame shall also incorporate a hoist which shall be a combination of double arm and scissor design. The tailgate handle release will allow the tailgate to drop completely in a vertical position.

CM SB MODEL SERVICE BODY- TRUCK NOT INCLUDED

No Rust, New red paint. (white boxes available) 56" cab to axle ( will fit 60" as well), dual wheel.

GOOSENECK STEEL TRUCK BED

BODY SPECS: Flatbed, Manufacturer: Knapheide, Model: PGNB-96A, Serial: 20120419-0248373, Length: 9'4", Width: 91", Gooseneck Hitch Ready,

2 Vertical and 1 Horizontal Compartment on each Side. Roll Out Tray and Low Sliding Roof. Stahl Model CX110VVD-52.50 110" x 94" wide Service Body for 60" CA Dual Rear Wheel Truck.

FLATBED W/500 GALLON TANK, 9' L x 93" W x 40" H

Call for more info on Rigs ups

2015 Fosson Truck Body - 10' X 30" X 36" Dump Body - 24" Cab Shield, 3/16" Floor, 10 Gauge Sides, 4" Cross Members on 12" Centers, 6x3x3/16 Top Rail, 6-Panel Air Tailgate.

Aluminum dump body with fold down sides with a new Rugby 4016 hoist $9200, also on hand new11 ft.dump bodies for $10200, also new 12 ft dump bodies for $10.700.

It is 24ft long x 92'' high x 94'' wide internally. You're viewing a 2013 US Truck Body 24ft box #box24. It has a wooden deck, translucent roof, 6 rows of Etrac, and a 3,000 lb liftgate.

*NEW & IN STOCK* 2018 Brandon FHD Dump Body – 16’6” Length #203924918

Huge 12' Curb Side Door. 24' Long 102" Wide 97 Tall Van Body.

Used 24' Dry Van, Swing Doors, E-Trac and wood slate tie offs, Translucent roof

15' x 42" sides with 54" gate, sub-frame type with under-body hoist, load cover