9 Ft Medium Duty Trucks For Sale In Boston

Body and hoist package in prime paint. NEW 2018 Crysteel 9' x 96" wide E-Tipper Dump Body. Crysteel Quick Install LB500 Hoist mounted under body with subframe and double acting 12V electric pump.

BRADFORD BUILT 96" X 112" MUSTANG STEEL FLATBED, 34" FRAME WIDTH, 60" CAB TO AXLE, FITS A DUALLY WHEEL CAB AND CHASSIS TRUCK, HEADACHE RACK, GN & RECEIVER HITCH, LED LIGHTS, LIGHTED HEADACHE RACK, SQUARE REAR CORNERS, 1/8" STEEL TREADPLATE FLOOR, RUB...

BODY SPECS: Flatbed Body by General, Length: 9'4", Width: 91.5", Headboard Height: 40"

New 2018 Crysteel 9' x 96" Stainless Steel S-Tipper. Crysteel Quick Install LB500 Hoist mounted under body with subframe and double acting 12V electric pump. 14" Fold down sides, 20" Quick-drop Tailgate.

New 2018 Crysteel 9' x 96" Stainless Steel S-Tipper. Crysteel Quick Install LB500 Hoist mounted under body with subframe and double acting 12V electric pump. 14" Fold down sides, 20" Quick-drop Tailgate.

NEW Bradford Built 9'4" x 96" wide Aluminum 4 Box Utility Flatbed. Capacity Recessed Gooseneck Ball and LED Lights. 4" Flip Down Sides, Headache Rack with Lights, 30,000 lb. Fits on 60" CA Truck with 34" wide frame.

Scelzi Enterprises VNL 9' enclosed utility /service body, 56" cab to axle (will fit 60" cab to axle as well), dual wheel, no rust, clean.

CM SB MODEL SERVICE BODY- TRUCK NOT INCLUDED

1/8" treadplate steel floor, Gooseneck compartment with 30,000lb. Rear skirt with recessed license tag bracket, LED tail lights and backup lights, and rear stake pockets. Structural steel crossmembers and longsills.

2000 Custom Built 9' x 96" wide Dump Body with New Floor and Rebuilt Understructure. 52" Front with 30" Cabshield, 26" Sides, 36" Tailgate, 6" Longsills. Manual Roll Tarp.

9’ Knaphiede Service Body, Fits 60" Cab To Axle, Good Condition, 6 Side Compartments, Rear Liftgate, Quality Install Services Available

It has two fuel fills, came off a 1 Ton ford. Custom made, 9 ft long by 7 ft wide. 60 INCHES CAB TO REAR AXLE CENTER--3 STORAGE BOXES BUILT IN

BODY SPECS: Manufacturer: CM Trailers, Serial: 95219, Length: 9.4', Width: 93", Headboard Height: 39", Gooseneck Hitch Ready, Chassis stock #7979

Eby Big Country 9' x 97'' Flatbed Towing Body; FOR DUALLY CAB & CHASSIS; Stake Pockets & Rubrail; Flush Trap Door for Gooseneck Hitch Access; Mud Flaps Included; Fenderettes Included; Aluminum; Fits a Chevy, Dodge or Ford;

FLATBED W/500 GALLON TANK, 9' L x 93" W x 40" H

*NEW & IN STOCK* 2017 Brandon MD Dump Body - 9' Length

12’L 96”W Beverage Body, All Aluminum Built, fits 84” Cab To Axle Trucks, 6 Roll Up Doors, Quality Install Services Available

Smooth Steel Floor, 4 1/2" Crossmembers on 12" Centers, 5" Steel Channel Longsills w/ 34" OD. NEW Scott 9' x 96" wide City Stake Platform 10 GA. Includes LED Light Kit. Interior Stake Pockets with Outside Pockets and Tie Straps on Sides.

Front Bulkhead: 10 gauge high tensile steel construction with two bend top flange. Paint: Glossy black thermoset powder coating on top of thermoset Zinc powder coat primer. Tailgate: Heavy duty cast quick release top hardware and cast overshot lower hardware...

DUMP BODY - UNDERBODY - 9'

30" Tailgate 20" Sidewall Height 9' Long 96" Wide Single coal chute Scissor Hoist Subframe

20' x 96" x 90" Morgan, Wood lined walls, Steel tread floor, Fiberglass roof, Rear floor drain

Walk Ramp And Trailer Hitch.

Trans Roof, Lift gate Maxon 3000 42 inch

NEW 2018 Cadet Western 9' x 96" wide Flatbed Treadplate Steel Floor, Gooseneck Compartment with 30,000lb. Rear Skirt with License Plate Bracket, LED Tail Lights, and 5" Rear Step. Ball and Trap Door.

Some with HK 400 heater units and some with HK III heater units. Have several bodies available with 5,500 Lb. rail lift gates. **Multiple bodies available.** Will also sell bodies without TK units and will sell TK units individually.